![]() ![]() This is the port that will connect to your Raspberry Pi. After that, configure one of the ports (I chose port 3) as a mirror destination port. Once connected, you may need to authenticate with the instructions provided with the switch and change the password. Once you have determined which address was assigned, you can navigate to the web-based management interface. It should ask your DHCP server for an address. Runs ntopng network traffic analysis softwareĬonnect the new managed switch to your regular home network. I chose a Netgear GS105Ev2 because of its low cost and mirroring capability. ![]() I already had an extra Raspberry Pi 3 and some Ethernet cables on hand, so I just ended up purchasing a managed switch. It allows us to have a copy of all traffic moving through our designated ports (from our router and our modem) onto a port connected to a Raspberry Pi. This is similar to how old Ethernet hubs used to work but is more configurable. Using a managed switch allows you to copy traffic from one or more ports onto a designated mirror port. I decided to do some research and came up with an inexpensive but powerful solution using a managed switch and the ntopng network analysis software. This made me concerned about what the other devices on my network may be up to. This was only brought to my attention because some sites on that machine were resolving to fraudulent servers. Recently, I discovered that a family member’s device on my home network had been DNS-hijacked. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |